H3C Technologies H3C MSR 50 - Manual (Page 210)

4-15
Description
Attribute
FIC-IMA-4T1 FIC-IMA-8T1
Supported service AAL5
Protocol PPPoA, PPPoEoA, IPoA, IPoEoA
Transmission rate CBR/VBR-rt/VBR-nrt/UBR
Interface LEDs
The following figures illustrate the FIC-IMA-4T1 and FIC-IMA-8T1 panels:
Figure 4-18 FIC-IMA-4T1 panel
Figure 4-19 FIC-IMA-8T1 panel
The following table describes the LEDs on the FIC-IMA-4T1/FIC-IMA-8T1 panel:
Table 4-14 LEDs on the FIC-IMA-4T1/FIC-IMA-8T1 panel
LED Description
LINK
z
OFF means no link is present;
z
ON means a link is present.
ACT
z
OFF means no data is being transmitted or received;
z
Blinking means data is being received or transmitted.
Interface cable
The FIC-IMA-4T1/FIC-IMA-8T1 module provides four/eight T1 ports and uses a 4T1/8T1 conversion
cable for connection. At one end of the cable is a DB-68 connector for connecting the router and at the
other end are four/eight RJ-45 connectors for connecting other devices.
The following figure illustrates an 8T1 conversion cable.