H3C Technologies H3C MSR 50 - Manual (Page 57)

2-37
Table 2-26 Interface attributes of SIC-1AM/SIC-2AM
Attribute Description
Connector type RJ-11
Number of connectors
1 (SIC-1AM)
2 (SIC-2AM)
Cable type Telephone cable with ferrite core
Maximum speed 56 kbps
Supported standard
ITU-T V.90, V.34 (33.6 kbps), V.FC, V.32 bis, V.32, V.22 bis, V.22A/B, V.23,
V.21, Bell 212A a, Bell 103.
Supported service Modem dial-up
Interface LEDs
Figure 2-48 SIC-1AM panel
Figure 2-49 SIC-2AM panel
Table 2-27 Description of the LEDs on SIC-1AM/SIC-2AM panel
LED Description
LINK
z
OFF means the link is idle.
z
ON means the connection has been established.
z
Blinking means the connection is being set up.
ACT
z
OFF means the link is idle.
z Blinking means data is being transmitted or received.
Interface cable
The connection cables for SIC-1AM/SIC-2AM are telephone cables with ferrite core. Both ends of the
cables are RJ-11 connectors. For cable pinouts, see Low-End and Mid-Range Series Routers Cable
Manual .