H3C Technologies H3C MSR 50 - Manual (Page 268)

4-73
Interface LEDs
FIC-24FXS has two kinds of LEDs, Active and Link.
Table 4-60 Description of LEDs on the FIC-24FXS panel
LED Description
Active
z OFF means all links are idle.
z
Blinking means one or more links are occupied.
Link Steady ON means no fault occurs on the link
The following figure illustrates the FIC-24FXS panel.
Figure 4-95 FIC-24FXS front panel
Interface cable
FIC-24FXS uses a 5 m (16.4 ft) or 15 m (49.2 ft) telephone conversion cable. At one end of the cable is
a D50 male connector that is used to connect to the FIC-24FXS module; at the other end are 24 RJ-11
connectors.