Yokogawa Touch Screen GP20 - Manual (Page 111)

1-97
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
Title of field
Set the title for the text field number you selected.
Characters
Set the characters for the text field number you selected.
Explanation
Batch function
• Batch Number and Lot Number
Display data and event data files can be identified by their “batch number-lot number”
(hereinafter referred to as batch name). The lot number does not have to be specified.
• Batch number (up to 32 characters)
• Lot number (up to 8 digits)
• Automatic Increment of the Lot Number
The lot number can be automatically incremented when the recording is stopped.
• Text Field
You can enter text fields into a file. There are 24 available text fields. Each text field
consists of the following:
• Field title (up to 20 characters)
• Field string (up to 30 characters)
You can use the touch screen to display text fields on the GX/GP screen.
• Batch Comment
You can enter up to three comments in a file. You can enter each comment once during
recording.
Comment 1, Comment 2, and Comment 3 (up to 50 characters each)
Using the Batch Function
You can enter text in measurement data files.
See the figure below.
For example, you can enter the operator name and administrator name in text fields.
Time
Record start Record stop
Data file
Comment
Batch number + lot number
Text field
Comment
For the procedure, see page 2-3 in section 2.1.2, “Using the Batch Function”.
1.10 Configuring the Batch Function