Yokogawa Touch Screen GP20 - Manual (Page 114)

1-100
IM 04L51B01-01EN
Explanation
Report Data Values
The range of report data values is from –9999999 to 99999999 excluding the decimal point.
Saving the Report Data
Report data is saved to the internal memory. If the number of report data entries exceeds
800, the data is overwritten from the oldest entry.
Time
Report data
Day custom
You can create daily reports by dividing files at the specified time interval (file creation
interval).
For example, in a three-shift system, you can set the file creation interval to 8 hours to
create a file for each shift.
1.11.2 Setting the Channels to Output Reports
Path
GX/GP: MENU key > Browse tab > Setting > Setting menu Report settings > Report
channel settings
Web browser: Config. tab > Report settings > Report channel settings
Hardware configurator: Report settings > Report channel settings
Description
Setup Item Selectable Range or Options Default Value
Report channel number GX20/GP20: 1 to 60
GX10/GP10: 1 to 50
1
Report channel number
Select the report channel number. The GX/GP generates reports in order by this number.
Report channel
Setup Item Selectable Range or Options Default Value
Channel type I/O channel, Math channel, Communication
channel, Off
—
Channel no 1 Channels that you can set —
Sum scale 1 Off, /s, /min, /h, /day —
1 Appears when the channel type is not set to Off.
Channel type
Set the channel type to assign to the report channel.
Channel no
Set the channel number to assign to the report channel. All channels can be assigned, but
reports are not created for channels set to Skip or Off even if they are assigned.
Sum scale
Set the sum scale to match the unit of the measured values.
Example: If the unit of the measured value is “m 3 /min,” select /min.
Off: The measured data is summed as-is once per scan interval.
1.11 Configuring the Report Function (/MT option)