Yokogawa Touch Screen GP20 - Manual (Page 263)

3-11
IM 04L51B01-01EN
Using Network Functions (Ethernet interface)
1
2
3
4
5
App
Starting Computing
Follow the procedure below to start computing on math channels.
Procedure
1
On the SMARTDAC+ Web Service tab, click Computing.
The Computing dialog box appears.
2
Click Start computing.
Computing starts. The indicator below the Computing button turns on in blue.
Stopping Computing
Follow the procedure below to stop computing on math channels.
Procedure
1
On the SMARTDAC+ Web Service tab, click Computing.
The Computing dialog box appears.
2
Click Stop computing.
Computing stops. The indicator below the Computing button turns off.
Resetting Computing
Follow the procedure below to reset computing on math channels.
Procedure
1
On the SMARTDAC+ Web Service tab, click Computing.
The Computing dialog box appears.
2
Click Reset computing.
The computed results up to that point will be reset.
Math ACK
Follow the procedure below to clear the icon (on the GX/GP) that appears when a
computation data dropout occurs.
Procedure
1
On the SMARTDAC+ Web Service tab, click Computing.
The Computing dialog box appears.
2
Click Math ACK.
The computation data dropout icon clears.
Alarm ACK
Follow the procedure below to acknowledge all alarms that are occurring.
Procedure
1
On the SMARTDAC+ Web Service tab, click Alarm.
The Alarm dialog box appears.
2
Click Alarm ACK.
Alarms are acknowledged.
Indicator below the Alarm button
See “Status Indications.”
3.1 Using a Web Browser to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)