Pop3 server, Mail header – Yokogawa Touch Screen GP20 User Manual
Page 142
1-128
IM 04L51B01-01EN
POP3 server
1
Setup Item
Selectable Range or Options
Default Value
POP3 server name
Character string (up to 64,
A a # 1
)
—
Port number
Numeric value (0 to 65535)
110
User name
2
Character string (up to 32,
A a # 1
)
—
Password
2
Character string (up to 32,
A a # 1
)
—
1 Appears when the SMTP client function is set to
On. You cannot change this item from the Web
browser.
2 Appears when authentication is set to
POP Before SMTP.
POP3 server name
If you need to use POP before SMTP, set the host name or IP address of the POP3 server.
Port number
Set the port number to use. Unless specified otherwise, you do not need to change this
number.
User name
Set the login name for accessing the POP3 server.
Password
Set the login password for accessing the POP3 server.
1.16.4 Setting E-mail Transmission Conditions (When the SMTP client function
is on)
Set the server configuration and the contents of the e-mail transmission.
For the mail format, see page 3-55 in section 3.2.5, “E-mail Format”.
Path
GX/GP:
MENU key > Browse tab > Setting > Setting menu Communication (Ethernet)
settings > E-mail settings
1
Web browser:
Config. tab > Communication (Ethernet) settings > E-mail settings
Hardware configurator:
Communication (Ethernet) settings > E-mail settings
1 Appears when the SMTP function is set to
On.
Description
Mail header
Setup Item
Selectable Range or Options
Default Value
Recipient 1
Character string (up to 150,
A a # 1
)
—
Recipient 2
Character string (up to 150,
A a # 1
)
—
Sender
Character string (up to 64,
A a # 1
)
—
Subject
Character string (up to 32,
A a # 1
)
—
Recipient 1
Set the address of recipient 1. You can enter multiple e-mail address in a recipient box.
When entering multiple addresses, delimit each address with a space.
Recipient 2
Set the address of recipient 2. You can enter multiple e-mail address in a recipient box.
When entering multiple addresses, delimit each address with a space.
Sender
Set the sender address. Set this if necessary.
Subject
Set the subject of e-mails.
1.16 Configuring the Ethernet Communication Function