Yokogawa Touch Screen GP20 - Manual (Page 246)

2-62
IM 04L51B01-01EN
2.7.5 Outputting Snapshots or Report Data to a Network Printer
You can output snapshots or report data to a network printer.
To enable snapshot output, you need to set Snapshot to On under Printer settings in
System settings.
To enable report data output, you need to set Report Template Output Printer to On under
Basic settings in Report Settings.
Procedure
Outputting a Snapshot
1
Press MENU.
The menu screen appears.
2
Tap the Universal tab and then Snap shot.
A snapshot is output to a network printer.
Operation complete
Outputting Reports
When report data is generated, it is automatically output to the printer.
2.7.6 Displaying Network Connection Information
See page 2-51 in section 2.3.8, “Displaying Network Information”.
2.7.7 Obtaining and Releasing Network Information Received through DHCP
You can manually obtain or release network information such as the IP address. You can
carry out this procedure when Obtain IP address automatically is set to On. You will show
the network information screen and then obtain or release information.
Procedure
Obtaining Network Information
1
Press MENU.
The menu screen appears.
2
Tap the Browse tab and then Network information.
The network information appears.
3
Press MENU.
The menu screen appears.
4
Tap the Context tab and then Request IP address.
The obtained IP address is displayed.
Operation complete
2.7 Performing Network Related Operations