Yokogawa Touch Screen GP20 - Manual (Page 302)

3-50
IM 04L51B01-01EN
Loading Settings into the GX/GP
Follow the procedure below to load the setting parameters from the GX/GP SD memory card
into the GX/GP.
1
On the Data tab, click Save load.
The save/load screen appears. The folders and files on the SD memory card are displayed.
2
Select the folder from the Folder list. The folders and files on the selected folder are
displayed.
3
Select the file you want to load.
The selected file name appears in the File Name text box.
If you double-click the file name, the Load from configuration file dialog box
appears. In this case, proceed to step 5.
4
Click Load.
The Load from configuration file dialog box appears.
5
Click Load.
To not load, click Cancel.
The setting parameters are applied to the GX/GP, and the Load as configuration file dialog box
closes.
Note
• Folders and files are not displayed if their names contain single quotation masks or semicolons.
• To prevent the Web application operation from being affected, security settings and IP address
settings are not loaded.
• If Communication (Ethernet) > Server settings > Server list > HTTP is set to Off, Web
application will no longer work. If the HTTP server port number is changed, restart the Web
application (see “Starting the Web Application”).
• Loading the settings may cause the GX/GP to restart.
3.1 Using a Web Browser to Change the GX/GP Settings, Monitor Data, and Control the GX/GP (Web server function)