Yokogawa Touch Screen GP20 - Manual (Page 194)

2-10
IM 04L51B01-01EN
Displaying Channel Information
You can carry out this procedure on the trend, digital, bar graph, overview and report
displays.
1
Tap the channel data digital display section to display the information about the
selected channel. On the trend display, double-tap the digital display section.
The channel information screen appears.
Trend display
Returns the waveform displayed
on top to the original condition.
On the trend display, tapping the digital display section once shows the tapped waveform
on the top.
2
Tap the Close icon.
The channel information screen closes.
Operation complete
Changing Alarm Values from the Monitor
You can carry out this procedure on the trend, digital, bar graph, and overview displays.
This procedure is applicable to channels that have alarms assigned to them.
In Display settings, under Screen display settings, Setting Changing each value from
monitoring On/Off must be set to On.
1
Tap a channel that has alarms assigned to it.
The channel information screen appears.
Edit alarm values.
2
Tap Edit alarm.
The alarm edit screen appears.
3
Tap the alarm level you want to edit.
A keyboard will appear.
4
Set the alarm value, and tap OK.
The new alarm value is applied.
Operation complete
2.2 Configuration of Measured Data Display