Yokogawa Touch Screen GP20 - Manual (Page 185)

2-1
IM 04L51B01-01EN
Operating the GX/GP
1
2
3
4
5
App
2.1 Starting and Stopping Recording and
Computation
This section explains how to start recording and computation.
2.1.1 Starting and Stopping Recording
Start and stop recording.
Procedure
Starting Recording
For the procedure when the batch function is in use, see page 2-3 in section 2.1.2, “Using the
Batch Function”.
1
Press MENU.
The menu screen appears.
Recording
2
Tap Recording.
The record start screen appears.
3
Tap Rec+Math or Record.
Recording starts. The recording status icon in the status display section changes from stopped to
started.
On models with the math option (/MT option), you can select Rec+Math. Computa-
tion starts when recording starts.
Stopped Sampling
Alternates
Operation complete
• You can also use the START/STOP key. If you use this key, recording will start
immediately.
To also start computing, in the math channel settings, you need to set START/STOP key
action to Start / Stop or Reset + Start / Stop.
For details on the settings, see page 1-48 in section 1.5.1, “Setting Basic Computation
Operations (Error indications, operation at start, and overflow handling)”.
• If you are recording display or event data in free run mode, the GX/GP starts recording
when you start recording. If you are recording event data in trigger mode, the GX/GP
enters the trigger-wait state.
Digital values are updated, but waveform data will not appear until a trigger occurs. For
instructions on how to display waveforms, see the reference below.
For the procedure to apply record start triggers, see page 2-5 in section 2.1.3, “Applying a
Record Start Trigger for Event Data”.
• For starting and stopping recording using event actions, see page 1-108 in section 1.14,
“Configuring the Event Action Function”.
Chapter 2 Operating the GX/GP