Yokogawa Touch Screen GP20 - Manual (Page 191)

2-7
IM 04L51B01-01EN
Operating the GX/GP
1
2
3
4
5
App
2.1 Starting and Stopping Recording and Computation
Stopping Computation
• Stopping Computation When Recording Stops
1
Press MENU.
The menu screen appears.
2
Tap Recording.
The record stop screen appears.
3
Tap Rec+Math.
Recording and computation stops, and the math icon in the status display section disappears.
4
Tap the Close icon to close the menu screen.
Operation complete
• Stopping Only the Computation
1
Press MENU.
The menu screen appears.
2
Tap Computing.
The Stop math computations screen appears.
3
Tap Stop.
Computation stops, and the math icon in the status display section disappears.
Operation complete
Note
When you stop computation, the computed value for math channels is set to the value held
immediately prior to computation stopping. When recording, this retained value is recorded.
Resetting the Computed Results on All Math Channels
You can carry out this procedure when computation is stopped and when computation is in
progress.
1
Press MENU.
The menu screen appears.
2
Tap Computing.
The Start math computations or Stop math computations screen appears.
3
Tap Reset.
The computation is reset.
Operation complete