App display characters of each value – Yokogawa Touch Screen GP20 User Manual
Page 43
1-29
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
Display characters of each value
1
Setup Item
Selectable Range or Options
Default Value
0
Character string (up to 8 characters,
A a # 1
)
—
1
Character string (up to 8 characters,
A a # 1
)
—
1 Appears when in the range settings, type is set to
DI and Calculation is set to Off.
0
Set the character string to display when the measured value is 0.
1
Set the character string to display when the measured value is 1.
Examples of display characters of each value
Receive a device operation status through DI input and display measured values (0 and 1)
as “Running” and “Stopped.”
You can select whether to display measured values (0 or 1) or characters.
See page 2-9 in section 2.2.1, “Displaying Measured Data as Waveforms, Numeric Values, or
a Bar Graph (Trend, digital, and bar graph displays)”
Running
Stopped
0
1
1.2 Configuring AI Channels (Analog input (including DI) channels)