Yokogawa Touch Screen GP20 - Manual (Page 369)

5-15
IM 04L51B01-01EN
Maintenance and T
roubleshooting
1
2
3
4
5
App
Status Messages
Code Message
801 Execution is complete.
802 Please wait a moment...
803 Data are being saved to media...
804 File is being loaded from media...
805 Memory save to media was interrupted.
806 Data save is completed.
807 Files are now being sorted.
808 Formatting...
809 Post process in progress.
810 Now loading historical data.
811 There was no unsaved data.
812 Media was recognized.
813 Media can be removed safely.
814 Media was removed improperly.
815 Failed the mounting of the media.
816 USB device is connected.
817 USB device cannot be recognized.
818 Press [MENU] key to login.
819 Media has wrong format.
821 Ethernet cable is connected.
822 Ethernet cable is disconnected.
823 Connecting to the line...
824 The data file is being transferred.
825 FTP test is being executed...
826 E-mail test is being executed...
827 Now connecting to SNTP server...
828 The command is sent to DHCP.
830 The response was received from DHCP.
831 IP address was set.
832 It is a setting of not registering hostname to the DNS server.
833 The hostname was registered to the DNS server.
834 The hostname was deleted DNS server.
841 Now adjusting the time.
850 Saving Settings.
851 A module was attached.
852 I/O module firmware is updating.
853 System reconstruction in progress.
854 The A/D calibration is being executed...
855 Initialization is in progress.
856 The A/D calibration value is being written...
857 The A/D calibration value is being reset...
860 It is not set to the recording channel. Please set to the recording channel.
861 Noise may influence measurement in fast mode.
863 Recording interval setting has been changed.
881 Measured data and settings have been initialized.
882 Measured data have been initialized.
891 Language setting changed. System is rebooted.
5.2 Troubleshooting