Yokogawa Touch Screen GP20 - Manual (Page 45)

1-31
IM 04L51B01-01EN
Configuring the GX/GP
1
2
3
4
5
App
Status Display Section
The status display section shows the following information.
Recording stopped
Recording in progress
Alarm icon
E-mail transmission is enabled.
Operation lock is enabled.
Date and time
When using the batch function
Math icon (/MT option)
SD memory card icon
When using the login function
Data type
DISP: Display data
EVENT: Event data
Recording progress
Error in internal memory. Contact your
YOKOGAWA dealer for repairs.
Displays the remaining recording time for the left bar graph. Recording status icon
Display name or group name
When using the login and batch functions
Displays the progress using a green bar graph. The frame
indicates the file save interval (display data)
or the data length (event data).
Status icon
The condition assigned to instrument
information output is occurring.
Displayed when any alarm is activated.
Blinks when there are alarms that
are occurring but have not been
acknowledged.
All alarms have been released after
they have occurred, but there are
alarms that have not been acknowledged.
Gray icon: Computation started
Yellow icon: Computation data
dropout occurred
Remaining memory space 50% or less
Remaining memory space 10% or less
Rremaining memory space 50% or more
External memory error
Bar Graph
If pre-trigger is specified for event data recording, the GX/GP will start recording pre-trigger
data when recording is started and the GX/GP enters the trigger-wait state. “Waiting”
appears in the bar graph. At this time, the progress bar turns orange.
When the pre-trigger time elapses, the length of the bar is fixed at that point. However, the
pre-trigger data is continuously updated in the background until the trigger condition is met.
When the trigger condition is met, the bar turns green, and data is recorded after the data in
the pre-trigger section.
1.2 Configuring AI Channels (Analog input (including DI) channels)