Ag-1030, Ag-1031, Ag-1032 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 163

Fabric OS Message Reference
141
53-1003140-01
AG-1030
5
AG-1030
Message
N_Port (ID: <port number>) has been determined to be unreliable.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the port goes online and offline often and therefore the port is marked as unreliable.
Recommended
Action
No action is required. The port will automatically be marked as reliable after a certain interval of time, if
the port toggling remains within the threshold limit.
AG-1031
Message
Loop Detected for device with Port WWN <port_name> connected to port <port
number>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a routing loop is detected for the device connected to the specified port.
Recommended
Action
Check the device configuration.
AG-1032
Message
N_Port (ID: <port number>) has recovered from an unreliable state.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the port state has been stable for the last five minutes.
Recommended
Action
No action is required.