Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 780)

758 Fabric OS Message Reference
53-1003140-01
SEC-1038
5
Recommended
Action
Run the command again using the standard WWN format; 16 hexadecimal digits grouped as 8
colon-separated pairs, for example, 50:06:04:81:D6:F3:45:42.
SEC-1038
Message
Invalid domain <domain ID>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an invalid domain ID was entered.
Recommended
Action
Verify that the domain ID is correct. If it is not, re-run the command using the correct domain ID.
SEC-1039
Message
<message>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the domain ID entered is out of range.
Recommended
Action
Verify that the domain ID is correct. If it is not, re-run the command using the correct domain ID.
SEC-1040
Message
Invalid portlist (<port list>). Cannot combine * with port member in the same
portlist.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the port list contains the wildcard asterisk (*) character. You cannot use the asterisk in a port
list.
Recommended
Action
Enter the port list values without any wildcard characters.