Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 485)

Fabric OS Message Reference 463
53-1003140-01
FLOD-1001
5
FLOD Messages
FLOD-1001
Message
Unknown LSR type: port <port number>, type <LSR header type>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the link state record (LSR) type is unknown. The following two LSR header types are the
only known types:
• 1 - Unicast
• 3 - Multicast
Recommended
Action
No action is required; the record is discarded.
FLOD-1003
Message
Link count exceeded in received LSR, value = <link count number>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the acceptable link count received was exceeded in the link state record (LSR).
Recommended
Action
No action is required; the record is discarded.
FLOD-1004
Message
Excessive LSU length = <LSU length>.
Message Type
LOG | FFDC
Severity
ERROR
Probable Cause
Indicates that the link state update (LSU) size exceeds the value the system can support.
Recommended
Action
Reduce the number of switches in the fabric or reduce the number of redundant inter-switch links (ISLs)
between two switches.