Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 282)

260 Fabric OS Message Reference
53-1003140-01
CONF-1000
5
CONF Messages
CONF-1000
Message
configDownload completed successfully <Info about the parameters and AD.>.
Message Type
LOG | AUDIT
Class
CFG
Severity
INFO
Probable Cause
Indicates that the configDownload operation was initiated and completed successfully. The Info about
the parameters and AD variable is the description of the classes of configuration parameters that were
downloaded. If Admin Domain (AD) is enabled, the AD number is specified in the description.
Recommended
Action
No action is required.
CONF-1001
Message
configUpload completed successfully <Info about the parameters and AD>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the configUpload operation was initiated and completed successfully. The Info about the
parameters and AD variable is the description of the classes of configuration parameters that were
uploaded. If Admin Domain (AD) is enabled, the AD number is specified in the description.
Recommended
Action
No action is required.
CONF-1020
Message
configDownload not permitted <AD Number if AD is configured on the system>.
Message Type
AUDIT
Class
CFG
Severity
INFO
Probable Cause
Indicates that a configDownload operation is not permitted. There are many possible causes.
Recommended
Action
Execute the errShow command to view the error log. Correct the error and execute the
configDownload command again.