Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 528)

506 Fabric OS Message Reference
53-1003140-01
FW-1170
5
FW-1170
Message
<Port Name> <Label>, is above high boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the number of signal losses that the port experiences has risen above the high boundary.
Loss of signal generally indicates a physical problem.
Recommended
Action
Check both ends of your cable connection. Verify that the cable is not faulty.
FW-1171
Message
<Port Name> <Label>, is between high and low boundaries(High=<High value>,
Low=<Low value>). Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of signal losses that the port experiences has changed from a value outside of
the acceptable range to a value within the acceptable range. Frequent loss of signal generally indicates a
physical problem.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs)
are not faulty.
FW-1172
Message
<Port Name> <Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of protocol errors that the port experiences has changed. Occasional protocol
errors occur due to software glitches. Persistent protocol errors occur due to hardware problems.
Recommended
Action
Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs)
are not faulty.