Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 851)

Fabric OS Message Reference 829
53-1003140-01
SEC-3039
5
SEC-3039
Message
Event:Security Violation , Status: failed, Info: Unauthorized host with IP address
<IP address of the violating host> tries to establish connection using <Protocol
Connection Type>.
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates a security violation was reported. The IP address of the unauthorized host is displayed in the
message.
Recommended
Action
Check for unauthorized access to the switch through the specified protocol connection.
SEC-3044
Message
The FIPS mode has been changed to <Fips Mode>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates there was a change in the Federal Information Processing Standards (FIPS) mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3045
Message
Zeroization has been executed on the system.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the system has been zeroized.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.