Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 507)

Fabric OS Message Reference 485
53-1003140-01
FW-1033
5
FW-1033
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the temperature of the small form-factor pluggable (SFP) has changed. Frequent
fluctuations in SFP temperature may indicate a deteriorating SFP.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1034
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the temperature of the small form-factor pluggable (SFP) has fallen below the low
boundary.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1035
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the temperature of the small form-factor pluggable (SFP) has risen above the high
boundary. Frequent fluctuations in temperature may indicate a deteriorating SFP.
Recommended
Action
Replace the SFP.