Rcs-1007, Rcs-1008, Rcs-1009 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 758

736
Fabric OS Message Reference
53-1003140-01
RCS-1007
5
Recommended
Action
If the reject is in the ACA phase, wait for several minutes and then retry the operation.
If the reject is in the SFC phase, check if the application license exists for the remote domain and if the
application data is compatible.
RCS-1007
Message
Zone DB size and propagation overhead exceeds domain <domain number>'s maximum
supported Zone DB size <max zone db size>. Retry after reducing Zone DB size.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified domain cannot handle the zone database being committed.
Recommended
Action
Reduce the zone database size.
RCS-1008
Message
Domain <domain number> Lowest Max Zone DB size.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified domain has the lowest memory available for the zone database in the fabric. The
zone database must be smaller than the memory available on this domain.
Recommended
Action
Reduce the zone database size.
RCS-1009
Message
Request remote domain <domain number> offline because it does not support RCS.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified remote domain is requested to go offline to take it out of the fabric because it
does not support reliable commit service (RCS).
Recommended
Action
Run the fabricShow command to verify that the remote domain is out of the fabric.