Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 587)

Fabric OS Message Reference 565
53-1003140-01
FW-1438
5
FW-1438
Message
Switch status change contributing factor Missing SFPs: <Number of missing SFPs>
missing SFPs out of <Total number of SFPs> SFPs:config(<Percentage configured>
percent,<Actual threshold limit>). (Port(s) <port list>).
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the number of missing small
form-factor pluggable (SFPs) is greater than or equal to the policy set by the switchStatusPolicySet
command.
Recommended
Action
Execute the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty
ports.
FW-1439
Message
Switch status change contributing factor Switch offline.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is not in a healthy state. This occurred because the switch is offline.
Recommended
Action
Execute the switchEnable command.
FW-1440
Message
<FRU label> state has changed to <FRU state>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the state of the specified field-replaceable unit (FRU) has changed to absent.
Recommended
Action
Verify that the event was planned.