Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 220)

198 Fabric OS Message Reference
53-1003140-01
BLZ-1003
5
BLZ-1003
Message
An IPsec/IKE policy was deleted.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that an Internet Protocol Security (IPsec) or Internet Key Exchange (IKE) policy was deleted
and the configuration file was updated.
Recommended
Action
No action is required.
BLZ-1004
Message
Tape Read Pipelining is being disabled slot (<slot number>) port (<user port
index>) tunnel (<The configured tunnel ID (0-7)>).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the Fabric OS version on the remote end of the tunnel does not support Tape Read
Pipelining.
Recommended
Action
No action is required.
BLZ-1005
Message
Datapath Slot:<slot number> Chip:<Chip number> reset during HAreboot.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that datapath chip reset happened during high availability (HA) reboot. Traffic may be
disrupted.
Recommended
Action
Reboot to recover.