Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 871)

Fabric OS Message Reference 849
53-1003140-01
SPC-3003
5
SPC-3003
Message
S<slot number containing Encryption Engine>, <module name>: No output KEK for DEK
rewrap, DEK: <DEK octet 1> <DEK octet 2> <DEK octet 3> <DEK octet 4>, KEK: <KEK
octet 1> <KEK octet 2> <KEK octet 3> <KEK octet 4>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the output wrapping key encryption key (KEK) for the data encryption key (DEK) to be
rewrapped does not exist within the encryption engine CryptoModule.
Recommended
Action
No action is required. The KEK will be recovered automatically.
SPC-3004
Message
S<slot number containing Encryption Engine>, <module name>: No output KEK for DEK
create, KEK: <KEK octet 1> <KEK octet 2> <KEK octet 3> <KEK octet 4>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the output wrapping key encryption key (KEK) for the data encryption key (DEK) to be created
does not exist within the encryption engine CryptoModule.
Recommended
Action
For opaque key vaults such as DPM, recover the missing master key to the current or alternate position.
SPC-3005
Message
S<slot number containing Encryption Engine>, <module name>: DEK inject error: <SP
status code>, DEK: <DEK octet 1 or other info> <DEK octet 2> <DEK octet 3> <DEK
octet 4>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an error in injecting data encryption key (DEK) into encryption engine. The SP status code
variable specifies the cause of the error:
• 14 - Invalid input DEK format
• 32 - DEK could not be unwrapped
• 33 - FGPA error upon inject
• 73 - Invalid key encryption key (KEK) format
Recommended
Action
Contact your switch service provider for assistance.