Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 822)

800 Fabric OS Message Reference
53-1003140-01
SEC-1250
5
SEC-1250
Message
DCC enforcement API failed: <failed action> err=<status>, key=<data>
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates an internal error caused the Device Connection Control (DCC) policy enforcement to fail.
Recommended
Action
Retry the failed security command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
SEC-1251
Message
Policy to binary conversion error: <text message> <value>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the security database conversion failed because of invalid values. The reason is specified in
the text message variable and the faulty value is printed in the value variable.
Recommended
Action
Retry the failed security command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
SEC-1253
Message
Bad DCC interface state during <Phase>, state=<state>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates an internal error has caused the Device Connection Control (DCC) policy update to fail in the
provision, commit, or cancel phases.
Recommended
Action
Retry the failed security command.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.