Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 960)

938 Fabric OS Message Reference
53-1003140-01
UPTH-1001
5
UPTH Messages
UPTH-1001
Message
No minimum cost path in candidate list.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the switch is unreachable because no minimum cost path (MPATH) exists in the candidate
list (domain ID list).
Recommended
Action
No action is required. This error will end the current shortest path first (SPF) computation.
UPTH-1002
Message
Domain <domain ID> is unreachable because the enabled TI zone is not compatible
with the fabric configuration.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the specified switch is unreachable because the traffic isolation (TI) zone and the fabric
configuration are incompatible.
Recommended
Action
Clear all TI zones and then create a valid TI zone for your fabric configuration. Refer to the Fabric OS
Administrator's Guide for more information on TI zoning.