Xtun-4107, Xtun-4115, Xtun-4120 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 979

Fabric OS Message Reference
957
53-1003140-01
XTUN-4107
5
XTUN-4107
Message
FTNL Tunnel <VE Port Number>.<Tunnel Group Number> (<Tunnel Id>) Circuit <Circuit
Number> <Priority Class>-Pri QoS CREATED.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified circuit has been successfully created.
Recommended
Action
No action is required.
XTUN-4115
Message
FTNL Tunnel <VE Port Number>.<Tunnel Group Number> (<Tunnel Id>) <Priority
Class>-Pri QoS DOWN (<Reason>).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified quality of service (QoS) for this tunnel group has gone down. The tunnel
group is non-active or this is expected. This applies to the data classes only. If the Control/F-Class goes
down, the tunnel group itself is marked as down.
Recommended
Action
If tunnel or circuit has not been administratively disabled or deleted, a possible network error or
disruption has occurred.
XTUN-4120
Message
FTNL Tunnel <VE Port Number>.<Tunnel Group Number> (<Tunnel Id>) <Priority
Class>-Pri QoS DELETED.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified extension over IP Tunnel has been administratively deleted.
Recommended
Action
No action is required.