Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 836)

814 Fabric OS Message Reference
53-1003140-01
SEC-1339
5
SEC-1339
Message
Distribute command failed. There are Inflight encryption enabled switch(s) in
fabric. Auth db(s) distribution is blocked
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates there was an attempt to distribute AUTH databases with switch policy (Off/Passive) from the
fabric to a switch that has Inflight Encryption enabled
Recommended
Action
Disable or enable Inflight encryption in all the switches in the fabric
SEC-1340
Message
<Message>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Device Connection Control (DCC) policy member is configured incorrectly.
Recommended
Action
Verify that the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-1341
Message
Failed to update client capability to ESS (Exchange Switch Support) after maximum
number of retries - return code <Failed return code>. Failing sync dump to standby
CP.
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates that Exchange Switch Support (ESS) is unable to update its capability. Failed to send the sync
dump to standby control processor (CP).
Recommended
Action
Verify that HA synchronization has failed using the haShow command. If HA synchronization has failed,
execute the haSyncStart command on active CP to resynchronize the HA state.