Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 177)

Fabric OS Message Reference 155
53-1003140-01
AUTH-1001
5
AUTH Messages
AUTH-1001
Message
<Operation type> has been successfully completed.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the secret database operation has been updated using the secAuthSecret command. The
values for Operation type can be "set" or "remove".
Recommended
Action
No action is required.
AUTH-1002
Message
<Operation type> has failed.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified action has failed to update the secret database using the secAuthSecret
command. The values for Operation type can be "set" or "remove".
Recommended
Action
Execute the secAuthSecret command again.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
AUTH-1003
Message
<data type> type has been successfully set to <setting value>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that an authentication configuration value was set to a specified value. The data type is
authentication type, DH group type, hash type, or policy type.
Recommended
Action
No action is required.