Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 198)

176 Fabric OS Message Reference
53-1003140-01
BKSW-1003
5
BKSW Messages
BKSW-1003
Message
kSWD: <Warning message>.
Message Type
FFDC | LOG
Severity
WARNING
Probable Cause
Indicates a warning state within the system.
A critical application error was reported in the watchdog subsystem. This message is used to convey
information regarding the state of the system. The switch will reboot (on single-CP switches) or fail over
(on dual-CP switches).
The Warning message variable will be one of the following:
• Detected unexpected termination of: daemon name - One of the critical daemons ended
unexpectedly.
• daemon name failed to refresh SWD*** Sending SIGABRT to PID process id number - One of
the critical daemons is found to be nonresponsive; sending signal abort (SIGABRT).
Recommended
Action
Execute the supportFtp command (as needed) to set up automatic FTP transfers; then execute the
supportSave command and contact your switch service provider.