Sec-3033, Sec-3034, Sec-3035 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 849

Fabric OS Message Reference
827
53-1003140-01
SEC-3033
5
SEC-3033
Message
Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set
to <Fabric-wide configuration set by user>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified event has occurred.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
SEC-3034
Message
Event: aaaconfig, Status: success, Info: Authentication configuration changed
from <Previous Mode> to <Current Mode> <Exisisting sessions are terminated or
not>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates an authentication configuration has changed.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3035
Message
Event: ipfilter, Status: success, Info: <IP Filter Policy> ipfilter policy(ies)
saved.
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified IP filter policies has been saved.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.