Sec-3036, Sec-3037, Sec-3038 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 850

828
Fabric OS Message Reference
53-1003140-01
SEC-3036
5
SEC-3036
Message
Event: ipfilter, Status: failed, Info: Failed to save changes for <IP Filter
Policy> ipfilter policy(s).
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified IP filter policies have not been saved.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3037
Message
Event: ipfilter, Status: success, Info: <IP Filter Policy> ipfilter policy
activated.
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified IP filter policy has been activated.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3038
Message
Event: ipfilter, Status: failed, Info: Failed to activate <IP Filter Policy>
ipfilter policy.
Message Type
AUDIT | LOG
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified IP filter policy failed to activate.
Recommended
Action
Verify the security event was planned. If the event was planned, no action is required. If the security
event was not planned, take appropriate action as defined by your enterprise security policy.