Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 781)

Fabric OS Message Reference 759
53-1003140-01
SEC-1041
5
SEC-1041
Message
Invalid port member <port member> in portlist (<port list>). <Reason>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the port member is invalid for one of the following reasons:
• The value is not a number.
• The value is too long. Valid numbers must be between one and three characters long.
• The value cannot be parsed due to invalid characters.
Recommended
Action
Use valid syntax when entering port members.
SEC-1042
Message
Invalid index/area member <port member> in portlist (<Port list>). Out of range
(<Minimum value> - <Maximum value>).
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified index or area member is not within the minimum and maximum range.
Recommended
Action
Use valid syntax when entering index or area numbers.
SEC-1043
Message
Invalid port range <Minimum> - <Maximum>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the specified port is not within the minimum and maximum range.
Recommended
Action
Use valid syntax when entering port ranges.