Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 538)

516 Fabric OS Message Reference
53-1003140-01
FW-1200
5
FW-1200
Message
<Port Name> <Label>, value has changed(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of C3 transmit timeout frames has changed.
Recommended
Action
Check the target device; it could be slow.
FW-1201
Message
<Port Name> <Label>, is below low boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of C3 transmit timeout frames is below the low threshold. A low number of C3
transmit timeout means that the switch is functioning normally.
Recommended
Action
Respond to this message as is appropriate to the particular policy of the end-user installation.
FW-1202
Message
<Port Name> <Label>, is above high boundary(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
AUDIT | LOG
Class
FW
Severity
ERROR
Probable Cause
Indicates that the number of C3 transmit timeout frames is above the high threshold.
Recommended
Action
Check the target device; it could be slow.