Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 992)

970 Fabric OS Message Reference
53-1003140-01
ZONE-1036
5
ZONE-1036
Message
Unable to create <config file name>: error message <System Error Message>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Fabric OS cannot create the zone configuration file. Typically, the zone configuration is
too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
ZONE-1037
Message
Unable to examine <config file name>: error message <System Error Message>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Fabric OS cannot examine the zone configuration file. Typically, the zone configuration
is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.
ZONE-1038
Message
Unable to allocate memory for <config file name>: error message <System Error
Message>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the Fabric OS cannot allocate enough memory for the zone configuration file. Typically, the
zone configuration is too large for the memory available on the switch.
Recommended
Action
Reduce the size of the zone database and retry the operation.