Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 861)

Fabric OS Message Reference 839
53-1003140-01
SNMP-1004
5
SNMP-1004
Message
Incorrect SNMP configuration.
Message Type
AUDIT | FFDC | LOG
Class
CFG
Severity
ERROR
Probable Cause
Indicates that the SNMP configuration is incorrect and therefore the SNMP service will not work correctly.
Recommended
Action
Change the SNMP configuration to the default using the snmpConfig --default command.
SNMP-1005
Message
SNMP configuration attribute, <Changed attribute>, <String Value>.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that the SNMP configuration has changed. The modified parameter and the old and new
parameter values are displayed in the message.
Recommended
Action
Execute the snmpConfig --show command to view the new SNMP configuration.
SNMP-1006
Message
<SNMP Configuration group> configuration was reset to default.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that the specified SNMP configuration group was reset to the factory default.
Recommended
Action
Execute the snmpConfig --show command for the group to view the new SNMP configuration.