Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 438)

416 Fabric OS Message Reference
53-1003140-01
FICN-1018
5
FICN-1018
Message
DevIng:FCUB Lookup failed for Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR>******.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON Control Unit sent a frame that cannot be associated with a FICON Control Unit
number (CUADDR).
Recommended
Action
Contact your vendor's customer support for assistance.
FICN-1019
Message
DevTapeEgr:AS Link Level Reject (LRJ) from Chan on Path=0x<VEPortNumber HostDomain
HostPort DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> LastCmd=0x<the Last 4
commands issued to the device> LastStatus=0x<the Last 4 status values received
from the device>.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates the FICON channel indicated in the path issued a Link Level Reject (LRJ) frame for a sequence
from the device.
Recommended
Action
If there was a job failure associated with this event, contact your vendor's customer support for
assistance.
FICN-1020
Message
DevTapeEgr:FICON Cancel received Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<the current emulation
state for the device> tflags=0x<the current emulation tape control flags for the
device> sflags=0x<the current emulation status control flags for the device>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates the FICON channel issued a Cancel sequence for a device in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer support
for assistance.