Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 991)

Fabric OS Message Reference 969
53-1003140-01
ZONE-1028
5
ZONE-1028
Message
Commit zone DB larger than supported - <zone db size> greater than <max zone db
size>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the zone database size is greater than the limit allowed by the fabric. The limit of the zone
database size depends on the lowest level switch in the fabric. Older switches have less memory and
force a smaller zone database for the entire fabric.
Recommended
Action
Execute the cfgSize command to view the zone database size information. Edit the zone database to
keep it within the allowable limit for the specific switches in your fabric.
ZONE-1029
Message
Restoring zone cfg from flash failed - bad config saved to <config file name>
[<return code>].
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the zone configuration restored from the flash memory was faulty. This error will save the
faulty zone configuration in the zoned core file directory.
Recommended
Action
If the problem persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
ZONE-1034
Message
A new zone database file is created.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a new zone database file has been created.
Recommended
Action
No action is required.