Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 544)

522 Fabric OS Message Reference
53-1003140-01
FW-1244
5
FW-1244
Message
<Label>, value has changed(High=<High value>, Low=<Low value>). Current value is
<Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of end-to-end word frames that the switch receives has changed. Receive
performance messages appear due to the number of word frames that travel from the configured S_ID to
the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1245
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of end-to-end word frames that the switch receives has fallen below the low
boundary. Receive performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1246
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of end-to-end word frames that the switch receives has risen above the high
boundary. Receive performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.