Fabr-1048, Fabr-1049, Fabr-1050 – Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) User Manual
Page 375

Fabric OS Message Reference
353
53-1003140-01
FABR-1048
5
FABR-1048
Message
Detected Fabric ID (FID <InheritedFID> inherited) conflict with switch
<Switchname> (domain <Domain ID>, FID <Fabric ID>).
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that a switch in the fabric has a Fabric ID (FID) conflict with the inherited FID of the local switch.
Recommended
Action
Make sure that all the switches in the fabric have the same FID or upgrade the switch firmware to a
VF-capable firmware.
FABR-1049
Message
Detected Fabric ID (FID <InheritedFID> inherited) conflict with neighbor switch
<Switchname> (domain <Domain ID>, FID <Fabric ID>). E_Ports (<Number of E_Ports
disabled>) connected to the switch are disabled.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the neighbor switch has a Fabric ID (FID) conflict with the inherited FID of the local switch.
All E_Ports directly connected to the conflicting switch are disabled.
Recommended
Action
Make sure that all the switches in the fabric have the same FID or upgrade the switch firmware to a
VF-capable firmware.
FABR-1050
Message
<License> license not present. F_Port trunking cannot be enabled on port(<Port>).
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the trunking or Server Application Optimization (SAO) license is not installed.
Recommended
Action
Install the license required.