Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 522)

500 Fabric OS Message Reference
53-1003140-01
FW-1134
5
FW-1134
Message
<Label>, is below low boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of fabric logins has fallen below the low boundary. Fabric logins occur when a
port or device initializes with the fabric. The event is called fabric login (FLOGI). A low number of fabric
logins means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1135
Message
<Label>, is above high boundary(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of fabric logins has risen above the high boundary. Fabric logins occur when a
port or device initializes with the fabric. The event is called fabric login (FLOGI).
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.
FW-1136
Message
<Label>, is between high and low boundaries(High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the number of fabric logins has changed from a value outside of the acceptable range to a
value within the acceptable range. Fabric logins occur when a port or device initializes with the fabric.
The event is called fabric login (FLOGI).
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the end-user
installation.