Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 607)

Fabric OS Message Reference 585
53-1003140-01
HAM-1005
5
• Fastboot
• Giveup Master:SYSM
• CP Faulty:SYSM
• FirmwareDownload
• ConfigDownload:MS
• ChangeWWN:EM
• Reboot:WebTool
• Fastboot:WebTool
• Software Fault:Software Watchdog
• Software Fault:Kernel Panic
• Software Fault:ASSERT
• Reboot:SNMP
• Fastboot:SNMP
• Reboot
• Chassis Config
• Reboot:API
• Reboot:HAM
• EMFault:EM
Recommended
Action
Execute the errShow command on both control processors (CPs) to view the error log for additional
messages that may indicate reason for the switch restart.
HAM-1005
Message
HeartBeat Miss reached threshold.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that either the active CP Ethernet Media Access Controller (EMAC) or the standby CP is down.
The active CP will run a diagnostic test on EMAC and will wait for the standby CP to reset it if it is down.
Recommended
Action
No action is required.