Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 972)

950 Fabric OS Message Reference
53-1003140-01
XTUN-1998
5
XTUN-1998
Message
FTRACE buffer <FTRACE Trace Buffer Number> has been cleared.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that a CLI command or supportSave operation freed the trace buffer back into the FTRACE
free pool.
Recommended
Action
No action is required.
XTUN-1999
Message
FTRACE buffer <FTRACE Trace Buffer Number> has been triggered.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that a programmed trigger event has been detected.
Recommended
Action
If there was an unexpected job failure associated with this event, contact your vendor's customer support
for assistance.
XTUN-2000
Message
FCIP Tunnel <VE Port (Tunnel) Number> UP.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the specified Fibre Channel over IP (FCIP) tunnel is up.
Recommended
Action
No action is required.
XTUN-2001
Message
FCIP Tunnel <VE Port (Tunnel) Number> DOWN (<Reason>).
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates that the specified Fibre Channel over IP (FCIP) tunnel has gone down.