Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 725)

Fabric OS Message Reference 703
53-1003140-01
PDM-1010
5
PDM-1010
Message
File open failed: <file name>, errno=<errno>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) process could not open the specified file.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1011
Message
File read failed: <file name>, Length(read=<Number of character read>,
expected=<Number of characters expected>), errno=<errno returned by read>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) process could not read data from the specified file.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.
PDM-1012
Message
File write failed: <file name>. Length(read=<Number of character read>,
write=<Number of characters written>), errno=<errno returned by write>.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the Parity Data Manager (PDM) process could not write data to the specified file.
Recommended
Action
Execute the firmwareDownload command to reinstall the firmware.
If the message persists, execute the supportFtp command (as needed) to set up automatic FTP
transfers; then execute the supportSave command and contact your switch service provider.