Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 217)

Fabric OS Message Reference 195
53-1003140-01
BLS-1000
5
BLS Messages
BLS-1000
Message
<command name> of GE <port number> failed. Please retry the command. Data:
inst=<ASIC instance> st=<ASIC initializing state> rsn=<reason code> fn=<message
function> oid=<ASIC ID>.
Message Type
LOG | FFDC
Severity
ERROR
Probable Cause
Indicates that the hardware is not responding to a command request, possibly because it is busy.
Recommended
Action
Retry the command.
BLS-1001
Message
FIPS <FIPS Test Name> failed; algo=<algorithm code> type=<algorithm type>
slot=<Slot Number>.
Message Type
LOG | FFDC
Severity
CRITICAL
Probable Cause
Indicates that a Federal Information Protection Standard (FIPS) failure has occurred and requires faulting
the blade or switch.
Recommended
Action
Retry the command.
BLS-1002
Message
An IPsec/IKE policy was added.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that an Internet Protocol Security (IPsec) or Internet Key Exchange (IKE) policy was added and
the configuration file was updated.
Recommended
Action
No action is required.