Achronix ACE Version 5.0 User Manual
Page 112
Editors
Chapter 3. Concepts
PCS Settings Page
The PCS Settings page allows the user to configure the granularity level of Tx/Rx physical coding sublayer
(PCS) customization.
Figure 3.57: PCS Settings Page
PCS Settings Page Options
Option
Description
Enable lane-specific Rx PCS
Settings
If enabled, instead of a single page configuring the Rx PCS settings and
a single page configuring Rx PCS Symbol Alignment for all lanes, each
lane will have its own pages.
Enable lane-specific Tx PCS
Settings
If enabled, instead of a single page configuring the Tx PCS settings for
all lanes, each lane will have its own page.
Enable lane-specific BIST
Settings
If enabled, instead of a single page configuring the BIST settings for all
lanes, each lane will have its own page.
UG001 Rev. 5.0 - 5th December 2012
100