Achronix ACE Version 5.0 - Manual (Page 351)

remove project ip Chapter 5. Tcl Command Reference
remove path
remove path < id >
This command removes a user-defined pin path.
Argument Required/Optional Description
< id > Required The required <id> argument specifies
the id of the path to remove.
remove project
remove project < projectName >
This command removes a project from ACE. The project file on disk is not deleted.
Argument Required/Optional Description
< projectName > Required The required <projectName>
argument is used to specify the
project to be removed (by name).
remove project constraints
remove project constraints < files > [-project < arg > ]
This command removes the link to an SDC constraint file from a project. The SDC constraint file on disk is
not deleted.
Argument Required/Optional Description
< files > Required The required <files> argument
is used to specify the SDC
constraint files (by file path).
[-project < arg > ] Optional The optional -project
<
projectName> option is used
to specify an alternate project
(by name) for the SDC constraint
file to be removed from.
remove project ip
remove project ip < file > [-project < arg > ]
This command removes the link to an IP settings file from a project. The IP settings file on disk is not deleted.
Argument Required/Optional Description
< file > Required The required <file> argument is
used to specify the IP settings
file (by file path).
339 http://www.achronix.com UG001 Rev. 5.0 - 5th December 2012