Set_false_path, Set_flyline_direction, Set_impl_option – Achronix ACE Version 5.0 User Manual
Page 376: 145set false path, 146set flyline direction, 147set impl option, Set impl option, Set false path, Set flyline direction
set impl option
Chapter 5. Tcl Command Reference
Argument
Required/Optional
Description
clock
Required
Specify clock domain
[-xp
<
arg
>
]
Optional
Extra pipelining amount (>=0)
[-cdc
<
arg
>
]
Optional
Extra pipelining added at each
crossing from another
(unrelated) domain into this
domain
Note:
If this command is executed after
(the Run Prepare flow step),
the
command
must
be
run
as
well
to
apply
the
changes.
See
for more information.
set false path
set false path [-from
<
args
>
] [-to
<
args
>
]
Define a false path exception (this declares that the clocks are unrelated)
Argument
Required/Optional
Description
[-from
<
args
>
]
Optional
from list (one or more clocks)
[-to
<
args
>
]
Optional
to list (one or more clocks)
This command specifies the clocks are unrelated (if the design has multiple clock lines). Before using this
command user must need to know about the clock relationship in the design. If this command is inferred
in ACE during back-end Place-&-Route, ACE will automatically understand the relationship between the
clock lines. Below is the command syntax for the user how to infer inside the SDC file or ACE tool:
set_false_path -from <clock1> -to <clock2>
set_false_path -from <clock2> -to <clock1>
set flyline direction
set flyline direction
<
direction
>
This command is used to control whether selected instance flylines are shown for loads of the selected
instance, drivers, or both.
Argument
Required/Optional
Description
<
direction
>
Required
The required <direction>
argument specifies whether
selected instance flylines are
shown for loads of the selected
instance, drivers, or both. Valid
values are loads only,
drivers only, both and all
set impl option
set impl option
<
option name
> <
value
>
[-project
<
arg
>
] [-impl
<
arg
>
]
This command sets options for a project implementation. Only one option may be set at a time.
UG001 Rev. 5.0 - 5th December 2012
364